T for 2
Okay,
So here's the update for the weekend. Last week we finished modifying the Chevy headers, welding on the Mopar flanges and mounting the intercooler. The 3" holes in the rad support were an SOB to cut. We had to but a 3" hole saw from Lowe's at about $30.00. This weekend we fabricated the exhaust. Not easy but after measuring, installing tacking, removing and reinstalling we wound up with what you see here. We are trying to find a reasonably priced master cylinder with the connections on the left side as it's going to be a tight fit. We already know that power brakes are out. Enjoy the pics.
Okay,
So here's the update for the weekend. Last week we finished modifying the Chevy headers, welding on the Mopar flanges and mounting the intercooler. The 3" holes in the rad support were an SOB to cut. We had to but a 3" hole saw from Lowe's at about $30.00. This weekend we fabricated the exhaust. Not easy but after measuring, installing tacking, removing and reinstalling we wound up with what you see here. We are trying to find a reasonably priced master cylinder with the connections on the left side as it's going to be a tight fit. We already know that power brakes are out. Enjoy the pics.
