[WANTED] 67 Dart Heater Box

-
Status
Not open for further replies.
Ok Dean, I have one, it's in a 67 Cuda, and it's "Model 702"!! It
Has a good door but the hinge is stuck and need to be oiled!! Check if yours is a 702 and I'll get it out and take a pic and include it here! I'll spray the hinge pins and get that ball rolling too!!
 
Thanks guys I finally figured how to leave the "conversations". Should be good to go. cosign I checked the box but apparently when they stamped it only Model and possibly a 7 shows the rest is smeared. ill try to get a pic tomorrow.
 
Top and cosign thanks for the offers. I'm putting it on hold for winter most likely, we just got our first snow dumped on us and looks like more to follow. My work space is outside unfortunately. Have a Great Christmas.
 
Dizzydean said:
Top and cosign thanks for the offers. I'm putting it on hold for winter most likely, we just got our first snow dumped on us and looks like more to follow. My work space is outside unfortunately. Have a Great Christmas.[/QUOTE

No problem!! I'll probably still have it if you need it later!! You and yours have a Merry Christmas as well!!
Click to expand...
 
Well our snow didn't last long(until today of course) and I had a chance to remove the whole unit and it is dirty and nasty looking but I should be able to clean and rebuild with a kit. The motor is very clean probably never used due to the core leak. Here are the pics of the half I need as you can see the model number was not quiet stamped completely also the part I broke off.

DSC_0004.JPG


DSC_0003.JPG


DSC_0002 (1).JPG


DSC_0001 (1).JPG
 
Status
Not open for further replies.
-

Back
Top