6.1 Hemi 69 Barracuda Fastback Father Son Project

I haven't done the math yet, but it should be 20-22 gallons or more. It's going to be the same width and depth as a stock tank at the axle end, and keep that depth 10" back and then taper up to about 4" deep back toward the bumper. I'm putting a 2" piece of aluminum pipe in the stock position, welded in at a 30 degree angle. I will use the stock steel fill tube, and connect them with gas hose and band clamps. I wanted to make the fill tube come out behind the license plate, but the angle wouldn't work out right.