1970 Dodge Dart Dash Removal

Here are the main attaching points. This is a 71 Valiant that we are working on - but is the same as a Dart. There are 5 bolts across the front of the dash, then two on the sides that have a slot to slide in...

Here's the driver's side to the center bolt (#3):



Here's the center bolt (#3) to the pass side:



Here are the two lower ones that you just need to loosen a few threads, then there is a slot in the dash frame that lets you rotate the dash rearward and out. Leave the screws in with a few threads gap when installing the dash and use them to rotate the dash forward until you line up the front 5 bolts...

Here's the one on the driver's side bottom of the dash:



Here's the one under the passenger side:



Then you have to disconnect all the heater, wiring, etc. to remove the dash completely...