67 Barracuda convertible, suspension rebuild

Look for a later Kframe and rebuild it, 73 to 74 will work. There is a spacer for the ball joint stud to reuse the earlier spindle if you need to use it. Make sure the sleeves on the kframe for the lower control arms are good, no cracks and the pins fit tight. The 67 kframe has a one year only idler arm, not the best design. I used a 68 kframe on mine and reinforced the steering box and lower control arm sleeves then did the R&R in one weekend. Leave the lower control arm pins loose till you get the ride height set then tighten them to spec.