Ok made a desision on camshaft between these two

lookin all around for the 313 lunati then I find it ITS A Hyd Roller!!,don't want to spend 100$ springs,460$ roller rockers,300$ for the cam,250-450$ for the roller lifters! For 1300 I could run a street solid roller and make 700 hp easy,think I will go with the 200 bucks for the flat tappet cam and lifters (Micro Trol) and save the 1100.00 and give up the 20-25 hp. I think the solid flat tappet cam would also save me about 500 bucks and make more power than the Hyd roller. Personally I think that the hyd rollers are the biggest waste of money there is,the lifters are way too heavy, they fall off at 6000-6400 rpm and the good lifters are over 600 bucks ..I'll go with a Hyd flat tappet followed by a solid Flat tappet w/tool steel 74gram lifters,then forget they invented a hyd roller and go to a street solid lifter,and lastly go to a full race solid roller,a solid will go 7000rpm and solid roller will pop before over reving.....how much more HP do u think a 242/252 hyd roller will make over a hyd flat tappet 242/252 the lift is neligable 552 to 565, peanuts they will both drop off at 62-6300 rpm waste of cash to me..........