Death wobble

brian6pac said
The caster shim is a tapered plate that goes between the axle and the leaf, it has a hole in the center for the I-bolt so you need to make sure it's long enough to go through the shim and into the axle. the shim twist the axle so the king pin angle changes. top of king pin should be further back than the bottom of the king pin.
Click to expand...
Awesome thank u so much speedway sells the shims for 20 bucks so I would assume they r correct but will double check I wanna say right King pin is straight up and down Ill get better pics tonight after work of the whole set up just to be sure but it sounds like the angel is the number 1 problems thanks again sir