Cam choice for low comp 360?

Here's a combo that works with a low compression 318 or 360. I'll assume your pistons are around .050 below deck.
https://www.summitracing.com/parts/sum-1798/overview/make/dodge
https://www.summitracing.com/parts/rhl-2018xl/overview/make/dodge
Summit hyd .480/.480 cam
Rhoads lifters
use your 273 rockers
use your 3.55 gear and converter
with your heads milled and thin gaskets mock it up and measure P to V clearance, also measure for correct pushrod lenght.
Motor will have the same noise as a solid lifter cam. Lower duration below 3k rpm will keep the bottom end power and 228@050 will provide upper rpm power. You basically have VVT.
My brother's 66 dart has this 360package with home ported 1.88/1.60 smog heads/drive train combo and the car is very streetable with the A/C on. Mash the pedal and you better be paying attention. The car is a rocket.