I'll snap some pics tonight.
I used of of these mandrel bent doughnuts and cut my angles from it...
Look at this on eBay
Mandrel Bend Donut Exhaust Intake Mild Steel Turbo acc. 3.0" 3.0in 3in 3.00" 3 | eBay
Cutting This in quarters and welding them up was the tightest S bend I could do myself and it worked for me
I will say it does not tuck as high as I would have really wanted but it does not hang any lower than the header flanges or the rear diff so I'm cool with it .