4 speedin
Well-Known Member
Can anyone confirm if redline poverty caps will fit a 15" steel rim? Is the center section geometry the same on 13s 14s and 15s to accept the different caps?
Thanks FABO
Thanks FABO
Redline poverty cap fitment
- Thread starter 4 speedin
- Start date
-
Same on 66 and later, early ones had a bigger center.
4 speedin
Well-Known Member
UOTE="jaws, post: 1971550296, member: 3343"]Same on 66 and later, early ones had a bigger center.[/QUOTE]
Thank you kindly!
Thank you kindly!
Alaskan_TA
Well-Known Member
It depends on the year of the 15" rim.
This one is a Mopar 15" rim, but the newer caps will not fit it. ;-)
This one is a Mopar 15" rim, but the newer caps will not fit it. ;-)
moparmat2000
Well-Known Member
Redline poverty caps will fit 80s fifth ave steelies. Those are 15x7. Heres pic of a 68 plymouth poverty cap on a 15x7 fifth ave rim.
4 speedin
Well-Known Member
Thank you much! I appreciate your input.
Easiest way to tell is to measure. The Red Line caps SS and Aluminum are 8-3/4" inside diameter. Most wheels that were from 68 up will accept them. Measure from the center of the wheel to the outside of the nub and double it. The larger 67 down caps are 9-3/4" ID
Bulldozer
free ice cream sandwiches
Those are cop car wheels. Rallye wheels won't take a cap
And you should slap your wheel guy for putting the balancing weight on the outside where you can see it
Exactly what do you think popo means,....? And I am My wheel guy, and I wanted the weights on dynamically, I just hadn't touched them up yet.............
bruceo2011
Still waiting for Y2K
The 9" poverty caps, red line etc. fit on all year Valiant/Dart 4"bc wheels. 13", 14" and aftermarket 15".
4 speedin
Well-Known Member
Great! Thank you much.
-
