383 with edlebrock performer RPM hood clearance
Most aftermarket filters are 14 inch diameter. The factory one is 13 inches I think. You will have to measure the inside diameter of the ring the filter sits on to see if you can make something else work. By the way I found the stock filter restrictive on the track (there is only about a 3/4 inch gap all the way around to draw air), so I made a second top for mine out of an old filter to use at the track.
Most aftermarket filters are 14 inch diameter. The factory one is 13 inches I think. You will have to measure the inside diameter of the ring the filter sits on to see if you can make something else work. By the way I found the stock filter restrictive on the track (there is only about a 3/4 inch gap all the way around to draw air), so I made a second top for mine out of an old filter to use at the track.
