Slant build / pistons

You need to be carefull, if you plan on using the 198 size long rods. With .120 milled off the deck, they may not work. Measure before spending money. The factory 198 rods were only for the forged crank, but K-1 and Molner had aftermarket rods in the 198 length for both the forged and cast cranks. The 198 length rod (7.005) cannot be used with a stock type piston, with a 225 crank, as the rod is .305 longer then the 225 rod (6.700), and the piston will poke out the top of the block. With .120 milled off the deck, you will probably need a custom piston (not the Wiseco PT112A), if you use the 7.005 rod.