Small block with a cross ram
Not hard to fab if you cant find one new. I checked his Ebay site out and didnt see one. I used a cable from the first around to the second for a 1:1 linkage when pulling on the driver side with an extended 4bbl stock cable. It worked fine, dual return springs and all, but I popped my top 2X4 plate due to a back fire and ended up going to a 1X4 top plate (both plate AL) as the 2 390's I had were questionable. I should have put a big freeze plug on top to vent a backfire to prevent cracking the top. lesson learned. Here is a pic of a stock one here.
Not hard to fab if you cant find one new. I checked his Ebay site out and didnt see one. I used a cable from the first around to the second for a 1:1 linkage when pulling on the driver side with an extended 4bbl stock cable. It worked fine, dual return springs and all, but I popped my top 2X4 plate due to a back fire and ended up going to a 1X4 top plate (both plate AL) as the 2 390's I had were questionable. I should have put a big freeze plug on top to vent a backfire to prevent cracking the top. lesson learned. Here is a pic of a stock one here.
