67 Fastback Engine Bay Measurements

Ill make some measurements for you. Mine has probably had some damage at one point as well so take it with a grain. when I measure from firewall/cowl to radiator support it measures 37.75 inches +/- 1/8". When I "X" measure from the pinch weld that meets the inner fender and joins the cowl piece to the firewall over to the same point that I measured on radiator support I get 62.25 +/- 1/8". So the engine bay seems pretty square but I do not have the fenders completely bolted up and that may sway my measurements. This car is still being put together and I believe that with so much new metal I see it could very well have been reworked.

I hope this helps, let me know if you need some other measurements. If you need an idea of what state the car is in I have some garage photos you could check out. If you have a drivers side lower rear quarter patch...Im looking. Seattle.