1968 Barracuda resto 13+ years in the works! 383 Six-Pack 4-spd??
Got into the buffing yesterday with a friend. I had wetsanded the whole car around 6-7 years ago with 1500 then 2000 grit, back when he buffed the front clip (we will need to cut and buff the front again from all the scratches over the years).
After wet sanding some areas I touched up, he followed with a wool pad & ClearCut compound. Final polishing was done with an 8" foam pad and Meguiar's Mirror Glaze.
The roof and decklid are done, we are working top to bottom on this. Today's goal is to finish the top edges of the doors, redo the hood & fenders, then start working down the sides.
Carnauba wax will go on at the very end.
Got into the buffing yesterday with a friend. I had wetsanded the whole car around 6-7 years ago with 1500 then 2000 grit, back when he buffed the front clip (we will need to cut and buff the front again from all the scratches over the years).
After wet sanding some areas I touched up, he followed with a wool pad & ClearCut compound. Final polishing was done with an 8" foam pad and Meguiar's Mirror Glaze.
The roof and decklid are done, we are working top to bottom on this. Today's goal is to finish the top edges of the doors, redo the hood & fenders, then start working down the sides.
Carnauba wax will go on at the very end.
