T for 2
Okay so we didn't get it started this weekend but we are CLOSE. I gave up my recently bought degreed harmonic damper to the cause as Larry's didn't get delivered on Friday as promised. We managed to get all of the clamps installed on the passenger side and then we find that we were short two 3" clamps. We used a couple of regular hose clamps we had until we can get the proper clamps. I worked on wiring the Fitech while Larry worked on the turbo oil feed and return lines. We installed the O2 sensor and Larry's Unilite distributor. I know that it is not what is recommended by Fitech but if it doesn't work out he will be ordering a TSP distributor from Johnny Pace. We made a tee for the coolant temp sensor so the Fitech and gauge temp sensors were both connected. We also installed extra wire looms to keep the plug wires off of the hot exhaust. We should have done this before the turbos were installed as working with two 6" extensions and 2 universal joints was a PIA. Anyway we are looking to run the fuel system next week and HOPEFULLY start it. Stay Tuned.......... Pictures!
Okay so we didn't get it started this weekend but we are CLOSE. I gave up my recently bought degreed harmonic damper to the cause as Larry's didn't get delivered on Friday as promised. We managed to get all of the clamps installed on the passenger side and then we find that we were short two 3" clamps. We used a couple of regular hose clamps we had until we can get the proper clamps. I worked on wiring the Fitech while Larry worked on the turbo oil feed and return lines. We installed the O2 sensor and Larry's Unilite distributor. I know that it is not what is recommended by Fitech but if it doesn't work out he will be ordering a TSP distributor from Johnny Pace. We made a tee for the coolant temp sensor so the Fitech and gauge temp sensors were both connected. We also installed extra wire looms to keep the plug wires off of the hot exhaust. We should have done this before the turbos were installed as working with two 6" extensions and 2 universal joints was a PIA. Anyway we are looking to run the fuel system next week and HOPEFULLY start it. Stay Tuned.......... Pictures!