Where to degree my cam?

4spdragtop said

So the spec card says 106* ICL and you guys say 106* so would the cam be installed straight up?
Sorry trying to learn. 4* advance would make ICl 110?
Thanks
Steve

Click to expand...

The cam in question is ground on a 110 lobe separation and is to be installed at 106. If installed at the 106 number, it's 4* advanced.

Advance/retard has too do with the ground LSA and the installed centerline (ICL). Installed number smaller than the LSA = advanced.

I would NEVER retard the timing of a camshaft in a mopar, except in extreme situations that most on this board will never come across.