/6 Exhaust: Dual or single? Your thoughts

I am going with a single chamber Flowmaster muffler. Like this: https://m.summitracing.com/parts/fl..._-flowmaster&gclid=CKP-gI-8pNMCFdgQgQod4lANzw

I've got 2.5 in pipe ready and going to make a complete exhaust from the header back. I'll have the measurements for all the pipe that you can pick up at the local parts house including hangers. If you can weld or have a buddy that welds, and don't want to spend 200 bucks at the local muffler shop, I'll be posting up the how to with everything.

My exhaust was done by a monkey with a welder. The welds are complete garbage and leaked all through out it. I'm taking the header flange off and re welding new pipe from that flange back and tucking the muffler up right before the rear axle. Then dumping it out right there with an angled tip. Going to try to hide it all under there. I do t want the tips coming out the back simply because I'm not going to bend five foot of pipe To go over the rear axle. I'm lazy sometimes but it should be fine.