New Moog k408 UCA bushings question

Yeah you need the Problem Solvers,

Altho, my thinking is these might work if the fit tightly into the available space, and the channels are not too torn up from previous installs. There are just 3 or 4 tiny injection nubs to help locate that bushing,basically nothing, so torque on the cam-bolt is gonna have to be adequate to hold an alignment. Then, without the washer, the clamp load is much reduced,to just the inner bushing ring; not much area at all.
IMO it wouldn't be worth it to me to install them, cuz if the slip, then you have a do-over, and the alignment guy doesn't work for free.