1969 Barracuda Wiring

Does your car have the A01 option and the tach?

The harness for the neutral safety switch make look wrong but M&H did not get the correct drawing from Chrysler. Easily fixed by unwrapping the tape back to the point the brown will reach up seperatly to the starter relay then re-wrap. The length and connectors are correct, M&H just wrapped it to far.

They built me an accessory harness and passenger side dome harness based on my originals. I was not trusting a single piece of the original after seeing green wire deep into the assemblies. The only mod I have made is to add my electric choke feed into the blue wiper +12v feed at the bulkhead by recrimping a new Packard connector with both wires and wrapping over that harness back up to the carb.