Axle problems

-

badbarracuda

Member
Joined
Jan 15, 2005
Messages
19
Reaction score
1
Location
hampton,tn.
Has anyone had any problems with the moser axles?I started with a pair of cut and resplined c body axles but upon inspection one day I noticed that I had twisted the splines on them so I upgraded to the mosers I've had them for about 7 years now before pulling them out because of a noisey gear which had a couple broken teeth I then discovered the same problem with the moser axle on the driver side
 
What's pushing it? My factory A's have held up very well!
 
Has anyone had any problems with the moser axles?I started with a pair of cut and resplined c body axles but upon inspection one day I noticed that I had twisted the splines on them so I upgraded to the mosers I've had them for about 7 years now before pulling them out because of a noisey gear which had a couple broken teeth I then discovered the same problem with the moser axle on the driver side
I twisted the strange axles in the ford 9" that was in my 406 vega also. If u are hooking up ,and got some power, I think they`ll all twist.
 
I twisted the strange axles in the ford 9" that was in my 406 vega also. If u are hooking up ,and got some power, I think they`ll all twist.
I was looking at the yukon axles they advertise theirs as rolled splines instead of cut splines are the moser's the same?
 
My original factory axles twisted a bit, I replaced them with Mosers and had them out recently, after a lot of years of punishment they are dead straight in the splines.
 
-
Back
Top