[FOR SALE] 1971 Complete 340 engine

-
Status
Not open for further replies.

QuintinMotorCompany

FABO Gold Member
FABO Gold Member
Joined
Jul 9, 2012
Messages
5,363
Reaction score
192
Location
Georgia Vermont
Rating - 95.8%
23   1   0
Contact seller
1971 340 .. Very Complete including Aluminum Torker intake, thermoquad carb, M/T valve covers, and more!

Last ran in 1993.. needs rebuild!

Crank Drilled for 4 speed

Needs Rebuild!!

Nice starting point!

$1,100 OBO + freight or local pickup from 05454

IMAG0070.jpg
 
Please post block numbers to cut down on all this conversation. PM sent to seller. Thanks, toolmanmike (moderator)
 
Last edited:
Pull the heads off and make sure its a good block.
Did it have antifreeze in it when you pulled it out?
 
Yes please do. Most of us are quite always from you. Buying would be easier if we knew more. I won't buy it till I see it and put my hands on it anyway...But a picture of a rusted and corroded engine don't help much...
 
Wow! what does the plate say? very hard to see. looks like rods .030, mains .010,
bore .060, cant make out the rest.
 
Yes,that's what it looks like too me too. Obviously it's been rebuilt before, but those are not good numbers...
 
Yes,that's what it looks like too me too. Obviously it's been rebuilt before, but those are not good numbers...
Take it to .090 on the bore, see if you strike water. Unless you have the car and want to sleeve it, just heads and accessories.
 
Status
Not open for further replies.
-
Back
Top