Glove Box Screws?

-

swingingdart

Well-Known Member
Joined
May 4, 2010
Messages
996
Reaction score
149
Location
Cassville, Missouri
Can anyone tell me what the glove box screws look like in a 67-72 Dart? I took mine out, but that was eight years ago, and I'm not sure which screws they are now. Any help is much appreciated!
 
Mine are small black pan heads maybe #8, the odd one is for the wire support it is chrome and has a shoulder for the wire.
 
Ah, okay. then I'll look for black screws in the bucket. I knew about the cable and it's screw, just wasn't sure on the others. My car, as most do, had it's glove box rot right out of it. And it's been so long, I almost don't remember if it ever had screws in it. :( Thank you!
 
I just put a plastic one in mine way better than the paper ones and about the same price.
 
Here are the screws that held the liner in on my 72 valiant parts car
IMG_2137.JPG
IMG_2138.JPG

Then of course, here's the screw for the cable as was mentioned
IMG_2139.JPG
 
I had that thought as I look at the bags and boxes of parts. I'm not sure I will remember where some of this stuff goes. Should have labeled better and definitely taking more pictures
 
I had that thought as I look at the bags and boxes of parts. I'm not sure I will remember where some of this stuff goes. Should have labeled better and definitely taking more pictures
If I had the ambition I'd take pics and measurements of every screw and bolt I take off this valiant and document it all in a binder so I have record of what everything looks like.
 
Find the ambition. I'm looking at parts and bags looking for certain items. I'm going to a car show next week and plan on taking pictures under the hood so I can put things back together. Five years ago I thought, I'll remember where this goes. Yeah, right
 
Find the ambition. I'm looking at parts and bags looking for certain items. I'm going to a car show next week and plan on taking pictures under the hood so I can put things back together. Five years ago I thought, I'll remember where this goes. Yeah, right
I know exactly what you mean! I've had my dash apart for about 2 months and I already have to check my parts car for what screws go where. As I take this valiant apart I'll put all the screws to a certain part into a separate ziplock bag and label it (all the left fender hardware into a bag, all the front filler hardware in a bag, etc.) so I'll have all the hardware on hand and labeled so if I wanna document it all later I can and if anyone needs any info I'll have the hardware on hand.
 
-
Back
Top