MSD 6AL Wiring and Ballast

From what I remember is that two wires are needed. The start wire from the switch and the run wire. Need to look them up, The wire running to the coil is not needed, the 6AL has a wire for the coil.

6AL
2 heavy gauge wires go to Battery +,-
2 wires in sheaf that go to +,- on coil, orange and black
white wire to tach
1 red wire to the switched 12 vdc, connect from car the brown and blue to this wire. Test with light that these two wire are hot when the key is turned and in the run position.
you are done