Dakota/ other projects are kickin my old A$$

Well after a long battle I finally got the rod knockin' 5.2 and transmission on the ground. I gave up pulling the engine only. Pulled the transfer off the trans in the truck cold windy, rainy, dreary Saturday, and dumped ATF all over my pants

Could not figure how to bolt up the hoist so I made some hooks out of flat strap. Put the leveler sideways and hooked them under the manifolds between the rear two cylinders.

IMG_0864cs.JPG

IMG_0865cs.JPG

IMG_0866cs.JPG

IMG_0867cs.JPG