Cheepy Three-Sixty build
Ok so there's been a new development. Installed the Magnum hall effect distributor and MSD 6530, drilled a hole next to #1 terminal in cap checked rotor phasing which was actually quite good and set timing to 40 total. Loaded a retard curve into the 6530 and did two pulls. It really must not have liked the locked out distributor I was using prior. J.Rob
Ok so there's been a new development. Installed the Magnum hall effect distributor and MSD 6530, drilled a hole next to #1 terminal in cap checked rotor phasing which was actually quite good and set timing to 40 total. Loaded a retard curve into the 6530 and did two pulls. It really must not have liked the locked out distributor I was using prior. J.Rob
