67 valiant redo
More progress made this weekend. We made some radiator hoses to connect the LS to the Be-cool A-body radiator I already had. We used the 38mm coupler(used for the LS steam port vent) I picked up to couple the upper radiator hose.
Also, you can see we switched the air intake to the other side. which worked out MUCH better. It originally couldn't go that direction with the contour fan setup, but with more trimming of the intake 90* off of the throttle body and some trimming of the fan shroud it cleared. Below is the amount we ha to trim off the fan shroud.
The intake turned out simple enough. Just a big round hole in the core support with a 6" hole saw.
Then the filter fit nicely inside the grill.
More progress made this weekend. We made some radiator hoses to connect the LS to the Be-cool A-body radiator I already had. We used the 38mm coupler(used for the LS steam port vent) I picked up to couple the upper radiator hose.
Also, you can see we switched the air intake to the other side. which worked out MUCH better. It originally couldn't go that direction with the contour fan setup, but with more trimming of the intake 90* off of the throttle body and some trimming of the fan shroud it cleared. Below is the amount we ha to trim off the fan shroud.
The intake turned out simple enough. Just a big round hole in the core support with a 6" hole saw.
Then the filter fit nicely inside the grill.
