[FOR SALE] 69 Dart Swinger

Wizard · May 18, 2017

Would like to possibly sell whole car what's left of it minus the 340 engine/trans that was in it. The whole rear is gone already. Rest of inside car interior is there if its not busted up from the tree or pole it hit. Steering wheel completely bent and broken backwards. Probably hit at 85 or 100 mph. Don't know the story on it. Will sell just the whole bumper/fenders part as it is broken away from cowl if someone wants it for a conversation piece minus the usable parts attached. Everything else up for grabs unless someone offers for the whole car.

Horn-$5.00
Lower control arms $35.00 ea

CL3406 · May 19, 2017

I'm interested in the front bench if it's complete & the frame isn't rotted out. Depending on the cost of course as I would needed shipped to 98230 blaine Wash. Your inbox is full, send me a PM if you like. Thanks

Joeychgo · May 19, 2017

need a price please - per the rules

Wizard · May 20, 2017

CL3406 said:
I'm interested in the front bench if it's complete & the frame isn't rotted out. Depending on the cost of course as I would needed shipped to 98230 blaine Wash. Your inbox is full, send me a PM if you like. Thanks

PM sent on price on bench

Wizard

madmax669 · Jun 6, 2017

you have the drive shaft

340doc · Jun 6, 2017

I'm looking for the 2 small chrome knobs on the heater and defroster controls if you have them.

72wedge · Jun 29, 2017

Looking for this piece, the bottom bracket piece that connects the cross brace bars to the floor.

Wizard · Jun 30, 2017

72wedge said:
Looking for this piece, the bottom bracket piece that connects the cross brace bars to the floor.

View attachment 1715061925

I have this piece. Cutting up the car. I can cut it out for you. You want everything that is in the red circle or more?

Wizard · Jun 30, 2017

340doc said:
I'm looking for the 2 small chrome knobs on the heater and defroster controls if you have them.

Will look. Cutting up the car now. Anything else?

Wizard · Jun 30, 2017

madmax669 said:
you have the drive shaft

There was a drive shaft in the back seat. You know the measurement? I have the book to look it up if you don't. What engine trans combo do you need it for?

Wizard · Jun 30, 2017

CL3406 said:
I'm interested in the front bench if it's complete & the frame isn't rotted out. Depending on the cost of course as I would needed shipped to 98230 blaine Wash. Your inbox is full, send me a PM if you like. Thanks

I am cutting up the car. Will be getting to the bench and rear seats. You have a e-mail I can send pics to then?

72wedge · Jun 30, 2017

Wizard said:
I have this piece. Cutting up the car. I can cut it out for you. You want everything that is in the red circle or more?

Thank you, but I've already found the piece

68 bee · Jun 30, 2017

What are the part numbers on the leaf springs and how much for them?

Wizard · Jul 1, 2017

68 bee said:
What are the part numbers on the leaf springs and how much for them?

I will check part numbers when I get them off

68 bee · Jul 1, 2017

Ok thanks

340doc · Jul 6, 2017

Wizard said:
Will look. Cutting up the car now. Anything else?

That's all for me!

Wizard · Jul 7, 2017

340doc said:
That's all for me!

I did not start cutting up car yet. Working on it though.

68 bee · Jul 7, 2017

Wizard said:
I did not start cutting up car yet. Working on it though.

Did you get the part numbers on the springs yet, I would like to pick them up at Carlisle Friday or Sat if they are the right ones.

Wizard · Jul 7, 2017

68 bee said:
Did you get the part numbers on the springs yet, I would like to pick them up at Carlisle Friday or Sat if they are the right ones.

Ok, I will work on it this weekend. Ran out of oxygen with torch. will get the numbers for you

Wizard · Jul 8, 2017

68 bee said:
Did you get the part numbers on the springs yet, I would like to pick them up at Carlisle Friday or Sat if they are the right ones.

I got the car up in the air now to look at the springs. I forget. Where are the part numbers on the springs located? Will get you some pics

ch1ll · Jul 9, 2017

what does the dashboard look like. 4speed car? need the 4 speed hump. need front seat tracks. also looking for clutch and brake petal assembly.

Wizard · Jul 9, 2017

ch1ll said:
what does the dashboard look like. 4speed car? need the 4 speed hump. need front seat tracks. also looking for clutch and brake petal assembly.

Dash is there but I don't know if it is salvable. This was a automatic car. I don't have any 4 speed humps. I am going to sell the seats but don't want to break them up. I don't have a clutch or brake pedal assembly.

Keystone · Jul 9, 2017

How are the lower c-pillars, from the seam down to about where the vinyl top trim would be located? I can also use the portion of the dutchman from the window ledge to again, where the vinyl top would end. The top on mine went bad and left some holes in those areas.

Wizard · Jul 9, 2017

Keystone said:
How are the lower c-pillars, from the seam down to about where the vinyl top trim would be located? I can also use the portion of the dutchman from the window ledge to again, where the vinyl top would end. The top on mine went bad and left some holes in those areas.

Geez. I just saw zawed the c pillars. Dutchman I saved and is okay. Trying to get back window out so was saw zawing around the whole back part of roof, have to get torch on inside to cut. I will get some pics of the c pillars and other pics

Wizard · Jul 10, 2017

Keystone said:
How are the lower c-pillars, from the seam down to about where the vinyl top trim would be located? I can also use the portion of the dutchman from the window ledge to again, where the vinyl top would end. The top on mine went bad and left some holes in those areas.

Let me know if you can use anything. I saw zawed. Let me know before I torch and saw zaw anything else?