Car dropped 250 RPM and is now stuttering
So while all the recent ideas were coming in I was rebuilding the eddy 1406. I took it apart, didn't find any blockages. I cleaned it good, took the jets and stuff out, cleaned those. All of this is superficial cleaning. I blew the passages out, nothing came out of them except air and gas/carb cleaner.
The main thing I did was change the gasket between the top and bottom part of the carb.
Hooked it back up. Hooked my cap and wires back up.
Fired it up, bam, runs just like it had no issues in the first place.
I'm happy but still miffed because I have no idea what the issue was. Maybe here was a vacuum leak on the gasket I changed? I sprayed it down looking for one earlier and didn't find anything.
I am still going to check out the timing and vacuum again now that it's back.
Although, I sort of feel like I'm jinxing myself by writing this post.
So while all the recent ideas were coming in I was rebuilding the eddy 1406. I took it apart, didn't find any blockages. I cleaned it good, took the jets and stuff out, cleaned those. All of this is superficial cleaning. I blew the passages out, nothing came out of them except air and gas/carb cleaner.
The main thing I did was change the gasket between the top and bottom part of the carb.
Hooked it back up. Hooked my cap and wires back up.
Fired it up, bam, runs just like it had no issues in the first place.
I'm happy but still miffed because I have no idea what the issue was. Maybe here was a vacuum leak on the gasket I changed? I sprayed it down looking for one earlier and didn't find anything.
I am still going to check out the timing and vacuum again now that it's back.
Although, I sort of feel like I'm jinxing myself by writing this post.
