How long to rebuild front suspension?

383Scampman said

AJ has it right . The UCA 's can be the single most difficult part . Remember , you will need a press to r&r the bushings . Be careful here and don't bend the UCA like I did . Torque the bolts to spec except the LCA nut (the big one) and the UCA cam bolts . Those are torqued when alignment is done . I use a paint stick to mark the ones I have torqued . Be safe , this is serious stuff . Good luck , Tom

Click to expand...

when I did the uca bushing , I used the bench vise and 3/4 inch drive sockets to push the old ones out, piece of cake ! note , that if your going to put bigger tires or wheels on you might want to install the offset uca bushing to get the camber /caster setting right. this last winter ,I pulled the new ones (regular ,centered holes ) and went with offset holes. So if you need them I got 2 sets of regular UCA bushings for sale !