Help me tune my dizzy?

So I played with the timing some today as well as the basic carb adjustments. First off, I found out that my timing light was FUBAR, so I borrowed a good one and ended up putting the initial timing at a true 16deg. Idle air screws on the carb ended up 1.5 turns out. Idle is about 900rpm right now, I wanna get it a little lower to 800rpm.

Took it out for a 30mile test drive. It runs really strong, and cruises fine, however it runs warmer than I'd like. At a steady 50mph/2000rpm the SW mech temp gauge shows around 200-205deg. At idle it'll creep up to nearly 220deg. I'm not sure if that's ok or normal, considering it is a 0.060" over 360. I'm running a 180deg Tstat, an aluminum 22" radiator from Northern Rads, and an electric fan.

I also found out that if I roll into the throttle in 1st gear, it's fine. However if I snap the throttle off idle it develops a traction issue even at part throttle. Weird, right?!