Need help with rotor phasing

I will call bullet camshaft and see if they have any suggestions on initial timing. A cam with 235 to245 duration calls for around 18 to 22 degrees initial with the information I have gathered from different sources. It will not kick back if I turn the engine over without firing it with a remote starter first. I am just trying to make sure the phasing is correct. I never had this problem until last fall when I changed the distributor. I have changed starter , relay on fire wall and carburetor from a 750 to a 650 . Since it does not kick back if I rotate the engine first without firing it seems to be ignition related.I know they have had some problems with phasing on some of there distributors.I am going to try what AJ/FORMS suggested tomorrow and give msd a call Tuesday