Help..70 Swinger Reproduction Turn signal Switch Wiring Question

Regardless of wire color it should "end up" same at the connector. If not, "I don't know" maybe you've been "chineseoationized"

You can actually sit down and build yourself a map, here's what you have:

INPUTS

Turn signal flasher,
Hazard flasher
Brake lights

OUTPUTS

left front signal
right front signal
right rear signal
left rear signal

Last, horn button (black)

So "centered, there should only be three wires showing continuity

Those are the brake lights "in" (white)

and left rear and right rear
===================================

With switch to left, you have

turn signal IN
left front turn
left rear turn

==========================

Opposite is true in right turn,

turn signal in
right front
right rear
=====================================

You can tell front from rear because the brake light power only feeds the rear

in left turn, the brake "in" will only go to right rear These two are then independent of the turn function in left turn

In right turn, the brake "in" will only to to LEFT rear

With the hazard engaged, you will have hazard flasher IN

all four turn.........left and right front, and left and right rear

AND I believe the brake IN power will be tied to these at that point.





Top to bottom
1....black is horn
2....light green left front
3....tan right front
4....pink hazard power IN
5....red turn flasher IN
6....dark green right rear turn/ stop
7....brown left rear turn/ stop
8....white brake lights power INput