[WANTED] cuda a body front nose piece

-
Status
Not open for further replies.
DavidLee

DavidLee

Well-Known Member
Joined
Aug 1, 2011
Messages
329
Reaction score
71
Location
Torrance, CA
Rating - 100%
3   0   0
Contact seller
Mine is ful of dents and want to see whats out there i need one for a 67 or 68, was not paying attention enough to the photo
q1969-plymouth-barracuda.jpg
 
Last edited:
DavidLee said:
its about the same, why mopar built this front piece so bad is beyond me
Click to expand...

No offense but....it's not Chrysler's fault your 48 year old car has dents.

You need a 69 specific Upper Valance. 67 and 68 are different. Not hard to find, they're out there.

Protect your 69 grilles, if you mess those up then you'll have problems.
 
KosmicKuda said:
No offense but....it's not Chrysler's fault your 48 year old car has dents.

You need a 69 specific Upper Valance. 67 and 68 are different. Not hard to find, they're out there.

Protect your 69 grilles, if you mess those up then you'll have problems.
Click to expand...
got a good 69 125.00 plus ride
 
I have a 67' header panel but just so you know 67' and 68' are the same overall but the emblem
holes are entirely different.
 
I don't recall a more confusing thread. The text reads 67 or 68 header panel ( flat center and mates a flat center hood ), Yet the pics attached are 69 only header panel ( hump in center mates a center hump hood ). My best guess... You have a 67,8 car, A previous owner put a 69 front clip on it and you're gathering parts to correct it.
Good hunting, whatever you're looking for.
 
cudascott said:
I have a 67' header panel but just so you know 67' and 68' are the same overall but the emblem
holes are entirely different.
Click to expand...
can I see the condition of yours, this is going to be on a 67 drag car so it is not going to be close to perfect
 
Status
Not open for further replies.
-

Back
Top