Well got a little more done to the pickup. Mounted the door just to find out it fit absolutely awful. I Made a cut down the side and bottom of the door and pulled it together and welded it shut. Fixed one problem but then the panel gap was way off. So I made two cuts down the side of the cab and moved it out a quarter inch to make the panel gap a little better. After that I went on to delete the air vents. I don't like the way they looked and felt like it was just another place for dust to get in. Got those welded shut and ground down. Then extended the kick panel to cover the whole area. I plan on covering the kick panel in a vinyl fabric. Summer is already flying by and I can already tell there just isn't enough time.