I don't have either.
I do have a B&M Quicksilver on the way, and would love any tips on making the console install and transmission hookup go smoothly. I am running a Lokar kickdown cable. Any interference issues between the two?
pull the front seats and the carpet. figure out where the shifter has to go first. the hook up the cable and mark the floor where the cable wants to go. then drill the hole. I used a punch to bend the metal so the cable fits better. (also used some left over fuel line with a slit cut in it to protect the cable where it goes through the floor and every other danger spot) cable gets routed down and towards the passenger side, between the trans and dipstick tube. I used one of the trans dust shield bolts and a clamp to keep it out of harms way. Adjust the cable with the trans in neutral. I'm sure I missed something but hope it helps.
