[SOLD] 1964 Dart 270 roller

-
Status
Not open for further replies.

Trevor B

Well-Known Member
Joined
Nov 2, 2014
Messages
509
Reaction score
140
Location
Novato, CA
Rating - 100%
8   0   0
Contact seller
This was on its way to becoming a race car but plans have changed... it is a pretty cool car but no bandwidth for the project.

Sheet metal in front is good - decent grill, hood, fenders, bumpers. Doors and glass good, windows roll up and down. Trunk lid and rear bumper good. Some bondo in rear quarters and wheel wells have been rolled. Floor pans are rusty, some rust in trunk, frame rails good.

A ton of trim in the trunk, emblems, extra gauge cluster, etc. Custom fenderwell headers for 360 that was previously in there. Have right tail light assy.

Front "seats" are from some unknown car and are sort of bolted in... badly. Power brakes, manual steering, LBP disc swap in front, LBP rear is 7.25 2.76 open (works good, from a Duster) but needs brake: shoes and kit.

Has 14" steel wheels and serviceable tires on now (not the cool rims in the pictures, although they could go with for extra).
01 Dart 270 front.png
02 Dart 270 side.png
03 Dart 270 rear.png
03a Dart 270 corner.png
07 Dart 270 trunk copy.png
Dart interior in garage.jpg


No engine or transmission.

Car is located in Fairfax, CA, 94903.

Please make reasonable offers on whatever you might need
 
What was the original drivetrain. /6 or V8 automatic or manual?
I don't know. It came to me with a 360 and a 727, with an aftermarket floor shifter. I can try to run the numbers next time I'm down there and see if it will tell me. I suspect automatic. My understanding is that the K-frame was the same for either V8 or /6.
 
Someone please take the whole car... need this out of the space.
$1200 o.b.o.
 
Status
Not open for further replies.
-
Back
Top