Wheel stud removal
I agree with grinding it down as close to the disc as you can, then heat, PBBlaster, a hammer and a drift/punch. Grinding it down will heat it up a bit and the vibration may help loosen it a hair. Some PB - because the stuff works.. and then rap the SOB with a decent size drift/punch and a hammer. You shouldn't even need a BFH - just a RFH... Regular F***ing Hammer. :D
![PPC905A.jpg PPC905A.jpg](https://www.forabodiesonly.com/mopar/attachments/ppc905a-jpg.1715058344/)