68 Dart rear window interior trim help
I took a quick picture. Mine is a 1970 Dart, the headliner is still in, the rear window and rubber seal is out. in the pic, you can see the "teeth" that hold the headliner in, to the left there is a screw hole for the trim, if you count three teeth to the left, the hole is between two and three. From what I can tell, the screw wouldn't go through the rubber, bur right up against it or darn close, or in between the rubber and the metal edge under the headliner. I also checked my gasket, and there are no holes. I am getting ready to do a headliner and vinyl top and install glass myself, so I have the gasket laying on my bench. if your gasket is wider, you may have to go through it or trim it. Hope this helped.
I took a quick picture. Mine is a 1970 Dart, the headliner is still in, the rear window and rubber seal is out. in the pic, you can see the "teeth" that hold the headliner in, to the left there is a screw hole for the trim, if you count three teeth to the left, the hole is between two and three. From what I can tell, the screw wouldn't go through the rubber, bur right up against it or darn close, or in between the rubber and the metal edge under the headliner. I also checked my gasket, and there are no holes. I am getting ready to do a headliner and vinyl top and install glass myself, so I have the gasket laying on my bench. if your gasket is wider, you may have to go through it or trim it. Hope this helped.