340/360 manifold or manifolds to work in 64-66 abodies

I know that a few FABO members run the late 60s 340 manifold on the driver's side (the 70s 340 driver's manifold is a different design) and the 96/97/98 Jeep Grand Cherokee manifold on the passenger's side. Mopar (Jeep) did make two different magnum passenger manifolds and I can post a pic of the correct one. If you buy the 360 magnum off of ebay you will pay between $40-$75 unless you can find one in the local savage yard. I have bought the correct 360 passenger's manifold for as low as $35. The 96/97/98 magnum manifold comes from the factory with a 2 1/8" exit hole which is just a little smaller than the 340. You can machine it out if you're careful. I don't know of any other large hole passenger's manifold that fits better or flows better. Be careful on ebay because unless you call the seller and verify the Hollander number you won't get the correct manifold.
You can find a 60s driver's manifold here on FABO for around $200. The least you'll pay if $150 and the most will be $275 or so.

treblig