Power rear windows in an early Dart?
but I can do a printout or cad file of the little C bracket that you weld onto the regulator. You will have to clock the regulators differently to clear the door jamb on the rears. here is a picture of the space you have to play in.
Yeah it's tight, that is why I decided to reverse the motor to the inside of the car and cut a bit of the sheet metal
heck no they are a pain in the butt to do. I wish I could have located smaller motors that would have rolled up and down the windows, I tried a few smaller ones from the salvage yards from Jap imports and European cars but they just were not powerful enough (didn't help that I needed to clean and lube up the mechanism)
but I can do a printout or cad file of the little C bracket that you weld onto the regulator. You will have to clock the regulators differently to clear the door jamb on the rears. here is a picture of the space you have to play in.
Yeah it's tight, that is why I decided to reverse the motor to the inside of the car and cut a bit of the sheet metal
