Car won't start. Could miss Carlisle! Please help.

Put a jumper between the two terminals on the ballast resistor (with the normal ignition wires still hooked up). If it starts and runs, the ballast resistor is probably bad. If it still starts when the key is in start, but shuts down once you put it in acc, then you probably have a bad connection somewhere on the run (not start) circuit. I can't remember if that's the blue or brown wire, I think it is the blue one. In this case, check the bulkhead connector to see if you have any loose or corroded terminals, make sure to check under the hood and the dash. I got so sick of mine that I wired a switch that keeps that circuit energized when the key comes off start. Works as a kill switch, too, but you can't accidentally leave it on or you may fry your ignition box or coil.