Do any companies make longer torsion bars.? Also, do they make front/rear sway bars for this year/model vehicle? Any input would be greatly appreciated. Thanks.
"Longer" bars would be for a B/E Body. What you want is a thicker in diameter A Body torsion bars. I forget what a stock 64 with a slant would have had so an upgrade would certainly help. A lot of members run .92 and higher bars which really helps in the ride and handling department. I would do a little research as everyone will have their own recommendations. I personally am going with 1.0 inch torsion bars from PST on my wagon.
Original Front early A sway bars show up occasionally for sale. You will need the LCA's with outboard sway bar tabs to run original sway bars. They show up for sale as well. 67-72 LCA's with the sway bar tab also work on early A's with the stock sway bar.
Helwig makes a beefy 1 & 1/4 inch (I think) hollow front sway bar that is light weight compared to a solid sway bar. Although not a true bolt-in, it's pretty close and can be used with original LCA's with the tab. It will also bolt to a tab that is attached to the shock bolt as well. The Helwig is what I will be using.
