Oil Leak Coming From Transmission Tunnel
Sorry for the late reply to the post but here has been my findings...
Looks like both those threaded plugs were BARLEY in there! About 1/2 to 1 thread was holding both of these plugs in the block. I span both of them out with my finger with ease. Also looks like the cam freeze plug has some gray silicone on it and doesn't look completely flush with the block (little off angle).
My plan is to:
Install a new cam freeze plug with Permatex #2
Install the 2 threaded plugs with teflon tape
Would you all agree that permatex #2 for the freeze plug and teflon tape for the threaded plugs should do the job?
Here are the photos....
Sorry for the late reply to the post but here has been my findings...
Looks like both those threaded plugs were BARLEY in there! About 1/2 to 1 thread was holding both of these plugs in the block. I span both of them out with my finger with ease. Also looks like the cam freeze plug has some gray silicone on it and doesn't look completely flush with the block (little off angle).
My plan is to:
Install a new cam freeze plug with Permatex #2
Install the 2 threaded plugs with teflon tape
Would you all agree that permatex #2 for the freeze plug and teflon tape for the threaded plugs should do the job?
Here are the photos....
