Adjustable strut rods post-install thoughts

While I had my Barracuda on the alignment rack with the sensors installed, I checked the readings with the LCA pushed to the travel extremes on the pin, and I found little to no changes. Which made sense to me, cuz the pivot point is at the strutrod attaching point, and the lever ratio is about what? 4 or 5 to 1. So 1/4 inch at the pin is .050 or less at the LBJ. I hammered my .103s all the way forward anyway, and they stayed there. I also modded my poly strut rod bushings to pull the LCA forward a bit, and installed a spacer up there to secure it in that forward position. My wheelbase is no longer 108",lol.