My stuff was early first run. That pickup tube is pre production. But I'm pretty sure the formed tube production pieces still have the screw in oil pump connection made of thicker stronger machined stock welded to the formed tube.
Parts came. Installing new main cap rods and windage tray. Looks like in the 7 years or so these pans have been on the market - Milodon has not made changes to correct the too long of stud, lack of clearance with these pans. Trimmed the ends of the tray studs and dimpled the pan.
Now have to deal with the pick up tube. Doesn't seem to extend far enough front to eliminate interference with lip inside pan.
