EQ Heads and stock rocker arms?

I have a stock bottom end 5.9 with EQ heads, 2.02 intakes and heavier springs. I run the factory stamped rockers and inexpensive pushrods that are slightly longer than stock. I got my information from magnumswap.com. My cam is a regrind of the factory cam, Profile #1357 from Oregon Camshaft. The lift is not quiet as high as yours. 5.15/5.15 with a 1.6 rocker. I've spun mine over 6500 RPM multiple times w/o issue. My setup is currently turbo charged. I recently replaced my head gaskets with the the thicker Felpros' because I popped both sides of the thin 0.28 ones.