Looking for an original A Body Dana LO23 or BO29 or Direct Connection
Well, flang-to-flang on my axel is close to 55" so the axel should be a 60´s B-Body.
Not pleased with this pic, but it was getting dark, and car sits a little low, so I had to aim from the hip like. Trying tomorrow again.
BS on rim is 4.5". On the pic it looks as if it is quit close to the leaf springs, but some six inches in reality.
Yes perspectives is really fooling you and it is really hard to tell. If picture on Landy´s Dart shows a 52.5 housing it would mean mine is an inch and a quarter wider.
First pic is of Landy´s Auto Dart. But don´t pay to much attention to second pic. Just a little of angel means a lot here...
![20160620_201630[1]LandyAuto FABO U bolt.jpg](https://www.forabodiesonly.com/mopar/attachments/20160620_201630-1-landyauto-fabo-u-bolt-jpg.1715076906/ "20160620_201630[1]LandyAuto FABO U bolt.jpg")
Well, flang-to-flang on my axel is close to 55" so the axel should be a 60´s B-Body.
Not pleased with this pic, but it was getting dark, and car sits a little low, so I had to aim from the hip like. Trying tomorrow again.
BS on rim is 4.5". On the pic it looks as if it is quit close to the leaf springs, but some six inches in reality.
Yes perspectives is really fooling you and it is really hard to tell. If picture on Landy´s Dart shows a 52.5 housing it would mean mine is an inch and a quarter wider.
First pic is of Landy´s Auto Dart. But don´t pay to much attention to second pic. Just a little of angel means a lot here...
