fan shroud question
well not like I wanted it to so I took it back. It had 4 tabs. 2 on each side that looked like a bolt would go through and I thought it would mount to the shroud holes but the holes was where you would put the plastic ties through the radiator and I wasn't going to do that. So I have decided to just mount a 16" Spal pusher fan on the front and hook it into a relay so if I get in stop and go traffic it will come on at 195* and go off at 180*. A lot of controversy about this but I think it will work. I may just hook it up to a switch and flip it on if I get in traffic. That is the only time I see the temp rising.