New rebuild....but tic..tic...tic

**UPDATE**
so I used a feeler gauge to measure each valve, I also noticed a slight diff. in stem height. I'm going to have to accurately measure that. Measurements as follow and bump starting to base circle:
Intake Exhaust
#2(0) #8(0)
#1(.003) #4(0)
#8(.003) #3(.017)
#4(.006) #6(.043)
#3(0) #5(0)
#6(0) #7(.011)
#5(.012) #2(.014)
#7(0) #1(0)
Car idled fine, no popping or spitting, but I'm not running it until I resolve. Exhaust lobe on #6 chewed up? Next step is to pull intake.:BangHead: